2018 Land Pride RBT3584

Call for Price

Land Pride



The RBT35 Series Blades are an excellent choice for leveling, finish grading, and backfilling applications at large feedlots, outdoor arenas, construction sites, nurseries, and maintenance operations on farms, ranches, or homeowner lanes or roadways. They are excellent for snow removal in the pulling or the push-blade mode. Their hydraulic or manual angle, offset, and tilt capability make them ideal for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.

  • Warranty: One year parts & labor. See warranty page for complete details.
  • 84" & 96" Working widths: Choice of two sizes to pick from. Both sizes handle large capacities.
  • 35 to 80 HP range for 2-Wheel Drive, 35 to 65 HP range for 4- Wheel Drive: Fits a wide variety of tractors.
  • Cat. 1 or 2: Fits wide variety of tractors.
  • Fits Land Pride Quick-Hitch: Quick and easy attaching without leaving tractor seat.
  • 3-Way Blade: Tilt, angle and offset features available hydraulically or manually.
  • Blade angles left and right up to 40o manually and up to 50o hydraulically in either direction: (9 positions manually: Center, 4 clockwise and 4 counterclockwise in 10o increments) (Hydraulically: Any degree up to 50 degrees) Allows the operator to set the blade at the angle of his choice up to 40o to complete the job with satisfactory results.
  • Blade offsets left and right up to 30”: (9 positions manually: Center, 4 positions left and 4 positions right) (Hydraulically: Any position up to 30”) Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments.
  • Blade tilts up and down up to 20o: Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes.
  • Fully welded main frame (Tubular construction): Fully welded adds overall strength and rigidity to blade frame.
  • Heavy-duty pivot assembly with 3” solid steel kingpin: 3/4” Plate steel turntable and 3” kingpin for handling the high amount of torque that can be transferred to this area.
  • Formed 17 inch Moldboard: Precisely formed moldboard rolls dirt and debris with ease.
  • 5/16” Moldboard thickness with box reinforcement: Thick material with fully welded box reinforcement creates a strong moldboard.
  • Reversible cutting edge: Get twice the wear from the cutting edge by flipping it over.
  • Retractable parking stand: Able to store the unit with the frame off the ground, also aids in attaching to tractor.
  • Blade Width: 84 in.
  • Approx. Weight: 709 lbs.
  • Max. Engine HP: 80 HP - 2 Wheel Drive, 65 HP - 4 Wheel Drive
  • Maximum G.V.W.: 9500 lbs.
  • Hitch Type: Cat. 1 & 2 Fits Land Pride Quick-Hitch
  • Blade Angle Manual Linkage: With blade facing forward or reversed - Up to 40° in 10° increments clockwise and counterclockwise
  • Blade Angle Hydraulic Cylinder: With blade facing forward or reversed - Up to 50 degrees clockwise and counterclockwise
  • Angle Cylinder: 3 1/2 in. x 14 in. x 1 1/4 in.
  • Blade Offset Manual Linkage: Up to 30 inches left and right in 9 positions (Center, 4 left and 4 right)
  • Blade Offset Hydraulic Cylinder: Up to 30 inches left and right
  • Offset Cylinder: 3 1/2 in. x 14 in. x 1 1/4 in.
  • Blade Tilt Manual Ratchet Jack: Maximum 20° up and 20° down with blade facing forward or reversed
  • Blade Tilt Hydraulic Cylinder: Maximum 20° up and 20° down with blade facing forward or reversed
  • Tilt Cylinder: 2 in. x 6 in. x 1 1/4 in.
  • Moldboard King Pin: 3 in. diameter
  • Moldboard Height: 17 in. tall
  • Moldboard Thickness: 5/16 in. reinforced, 3/16 in. tapered reinforcement channel
  • Cutting Edge: 1/2 in. x 6 in. Heat treated, Replaceable & Reversible (Double bevel)
  • Main Frame Construction: Fully Welded Tubular Construction
  • Parking Stand: Retractable
  • Accessories: Manual or Hydraulic Single Gauge Wheel, Skid Shoes, End Plates, Hydraulic Selector Valve and Cushion Valve



Cutting Width
84 in.
Cutting Edge Height
6 in.
Moldboard Height
17 in.
Blade Angling
Manual Linkage: Up to 40 deg. in 10 deg. increments, left and right; Hydraulic: Up to 50 deg. left and right
709 lb.

Related Products